40706-1608
4 14
OPENING THE SAFE USING
YOUR COMBINATION
Enter your combination using the buttons. The
buttons will light up green and there will be one
“beep” for every entry (if the sound is turned on). If
you entered the correct combination, the buttons will
flash green and the drawer will open. If the
combination is incorrect the safe will beep 3 times (if
the sound is turned on) and the red light will flash 3
times. NOTE: You will have 2 seconds between
individual entries before the safe assumes you have
entered your complete combination.
To close the safe, push the drawer closed until locked.
TURNING THE KEYPAD SOUND
OFF/ON
You can turn off the "Beep" sound of the keypad by
pressing all the buttons at the same time and
holding for 3 seconds until the green light flashes.
To turn the "Beep" sound on, press the left and
middle button at the same time and hold for 3
seconds until the green light flashes.
If an incorrect security code is entered 3 times the
safe will beep 5 times (if the sound is turned on)
and the red light will flash 5 times resulting in the
safe being automatically locked out for 60 seconds
before you can try your code again. The safe will
beep one time (if the sound is turned on) and the
green light will flash once when the lockout
period is over.
If an incorrect security code is entered 1
additional time the safe will beep 5 times
(if the sound is turned on) and the red light will
flash 5 times resulting in the safe being
automatically locked out for 5 minutes before the
code can be tried again. The safe will beep one
time (if the sound is turned on) and the green
light will flash once when the lockout
period is over.
Your safe comes with the "Beep" sound turned on.
