STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
40544-1507
4
18
The safe must be mounted to a shelf. For optimal
safety and security, the safe should be installed in
an isolated, dry and secure area.
SECURING THE SAFE
SELECTING A LOCATION
IMPORTANT
Keep keys and your combination number in a
secure place, away from children. Keep this record
of your serial number and combination in a secure
place separate from your safe. To order a
replacement key set, follow the instructions on the
attached form.
NOTE: This safe must be mounted to a shelf.
Failure to do so will compromise the safety and
security of the safe.
NOTE ON LOCKING THE SAFE: The safe
needs to be in an upright position, as shown in
figure 1, for the locking mechanism to function
properly. Failure to mount the safe in the
corrrect upright position will compromise the
safety and security of the safe.
Secure the safe to a shelf using the predrilled
mounting holes in the safe and hardware provided.
Place the safe in the desired location and mark the
mounting holes to be used with a pencil. Move the
safe and drill the pilot holes for the screws. For
mounting to a shelf, drill 3/16” diameter pilot holes
and attach the safe using the 3/4“ screws and
washers. (Figure 2)
Figure 1
QAS-1545
QAS-1545
QAS-1512
QAS-1512
Figure 2
THE SAFE SHOULD ALWAYS BE KEPT
OUT OF THE REACH OF CHILDREN.
