SELECTING A LOCATION
SECURING THE SAFE
Mark the holes to be used. Drill the appropriate
diameter and depth of pilot holes depending on the
type of hardware being used and the type of
mounting surface.
Secure the safe with the fasteners.
LOCKING THE SAFE
To lock the safe, close the door and rotate the
handle counter clockwise until it stops. If the
handle is not turned until it stops, the locking
mechanism will not lock.
NOTE ON LOCKING THE SAFE: Because
the locking mechanism is deactivated for
combination is entered, wait a minimum of 6
seconds from the time the combination is entered
to lock the safe.
TURNING THE KEYPAD SOUND OFF/ON
entering the code
6 3 3
.
To turn the "Beep" sound on, enter the code
6 6.
Remove the baseboard if necessary.
optimal safety and security, the safe should be
installed adjacent to a side wall with minimal
space on either side of the safe, in an isolated,
dry and secure area.
CHILDREN SHOULD NOT PLAY
WITH OR AROUND THE SAFE AT
ANY TIME.
Use the hardware provided or consult your
hardware retailer for fastening hardware for your
particular mounting surface.
Failure to do so will compromise the safety and
security of the safe.
40248-2203
3 18
