FirstLine UPS
Form No. 003-2323 Rev B
36
11. Reconnect the internal battery(s) in the UPS.
12. Replace the inner panel.
13. In there is an external battery, reconnect all of the batteries and replace the inner panel.
If there is the optional breaker, simply close the breaker to connect the battery.
14. Replace the outer panels on the UPS and the battery cabinet (if present).
15. Reapply utility ac power to the UPS.
16. Start the UPS.
17. Verify that the battery lamp glows green. Look at the battery parameter screen (Down,
Right, Right, Right) and verify that the battery current is positive (charging) or that it is near
zero and the voltage is 460 - 470 Vdc.
Summary of Contents for FirstLine
Page 43: ......
