Form No. 003-2282 Rev G
3
1.1.12 Do not install the UPS in direct sunlight. Your warranty may be void
if the batteries fail.
1.1.13 Install the UPS indoors as it is not designed for installation outdoors.
1.1.14 Dusty, corrosive and salty environments can do damage to any UPS.
1.1.15 Install the UPS away from objects that give off excessive heat and
areas that are excessively wet.
1.1.16 If liquids are spilled onto the UPS, or foreign objects dropped into the
unit, the warranty will be null and void.
1.1.17 The battery will discharge naturally if the system is unused for any
length of time.
1.1.18 Recharge the batteries every 2-3 months if unused. If this is not done
the warranty will be null and void. When installed and being used, the
batteries will be automatically recharged and kept in top condition.
1.1.19 This UPS supports electronic equipment in offices,
telecommunications, process control, medical and security applications.
This UPS is NOT intended for use in the following application:
a. Medical equipment directly related to human life
b. Elevator, Metro (Subway) system or any other equipment related to
human safety.
c. Public system or critical computer systems.
1.1.20 Do not install the UPS in an environment with sparks, smoke or gas.
1.1.21 Make sure the UPS is completely turned off when moving the UPS
from one place to another. It might cause electrical shock if the output is not
turned off.
1.1.22 The UPS is equipped with a Maintenance Bypass Switch. Please
follow the procedures strictly to switch on/off the Maintenance Bypass
Switch.