32
5 Bundled
Software Installation Guide
5.1. Hardware Installation
1. Connect the male connector of RS232 cable to the UPS communication
port.
2. Connect the female connector of the RS232 cable to a dedicated RS232
port of the computer.
3. For optional interface cards, you may refer to Chapter 6 for installation.
5.2. Software Installation
Please refer to the user’s manual of the software for installation.
33
6 Customer Options Slots
6.1. All the below interface cards are with built-in EPO function.
The pin assignments of the EPO are:
1
Æ
EPO+
2
Æ
Ground
6.1.1
To enable the EPO function, please short Pin 1 & 2.
6.2. R2E (2nd RS-232 ) card
6.2.1
CN1 is for RS232 DB9 and CN3 is for EPO.
6.2.2
For communication protocol, please refer to Chapter
2.4.1
6.2.3
Installation Position: slot1 or slot 2.
6.2.4
Adapted flat cable: cable A or cable B
6.2.5
For installation, please refer to Chapter 6.7
6.3. RSE (RS-485) card
6.3.1
CN1 for EPO, CN2 for RS485 and CN3 for remote
power.
6.3.2
For com munication pr otocol, ple ase see the
definition below:
6.3.3
Installation Position: slot1 or slot 2.
6.3.4
Adapted flat cable: cable A or cable B
6.3.5
For installation, please refer to Chapter 6.7
1
2
1
2
CN3
1
2
3
CN2
1
Æ
Ground
2
Æ
A/Data+
3
Æ
B/Data-
1
Æ
AC+
2
Æ
AC-