38
5. Remove the battery packs from the battery bank as shown in Step 5.
39
8 Specifications
INPUT
Voltage Range
160 -280Vac
Frequency
45 ~ 65 Hz
Phase/Wire
Single, Line + N Ground
Power Factor
Up to 0.99 at 100% Linear Load
Current THD
<5% at 100% Linear Load
OUTPUT
Connection Hard
wire
Hardwire
Voltage
208/120Vac or 240/120Vac
208/220/230/240Vac Selectable,
280/120, 240/120
Voltage Adjustment
+/- 0%; +/- 1%; +/- 2%; +/- 3%
Voltage Regulation
+/- 2%
Capacity 60
00VA/4200W
Rated Power Factor
0.7 Lagging
Wave Form
Sine Wave, THD < 3% (no load to full load)
Frequency Stability
+/- 0.2% (Free Running)
Frequency Regulation
+/- 1%
Transfer Time
0ms
Crest Factor
3:1
Efficiency (AC to AC Nominal)
91%
Efficiency (AC to AC ECO
Mode)
Up to 97%
Leakage Current
< 3mA @ Full Load
DC Start
Yes
Cooling
Variable Speed Fans (load determines speed)
DISPLAY, ALARMS, DIAGNOSTICS & COMMUNICATIONS
Status On LED + LCD
Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery
Bad/Disconnected, Overload, Transferring with interruption & UPS Fault
Readings On LED + LCD
Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load
Percentage, Battery Voltage & Units Inner Temperature
Self-Diagnostics
Upon Power –on, Front Panel Setting & Software Control, 24 Hour self check
Audible Alarms and Visual
Line Failure, Battery Low, Transfer to Bypass, System Fault Conditions
Communications
RS232 Serial Port ( 2 slots available for optional SNMP/WEB, USB or Dry Contact
Card)
PHYSICAL
Input Connection
Hardwire and Cord with L6-30P Plug (Selectable)
Output Connection
Hardwire
Dimensions (H x W x D) inches
3.5 x 17.3 x 26 (2U)
Weight (l bs.)
53
Listing
UL1778; CE – FCC Class A
*Model – UPS Module 1
SC60021RM
SC60022RM
