40
EXTERNAL BATTERY PACK – Module 2
*Model
SC-BP6000RM-1
(same battery used for extended run times)
Battery Run Time @ Full Load
8 minutes
Type
Sealed Lead Acid Maintenance Free, 20 each 12V/7AH, 240Vdc
Hot – Swap Batteries
Yes
Recharge Time
4 hours to 90%
Battery Connection
Plug Connector
Extended Run Time Battery
Packs
Yes
Dimensions (H x W x D)
5.25” x 17.3” x 26” (3U)
Weight (l bs.)
119
*OUTPUT TRANSFORMER/MANUAL BYPASS - Module 3
(Hardwired to UPS Module)
Output Voltage
208/120Vac or 240/120Vac
208/120Vac or 240/120Vac
Manual Bypass Switch
Make-Before-Break
Dimensions (H x W x D)
3.5” x 17.3” x 26.0” (2U)
Weight (l bs.)
93
POWER DISTRIBUTION UNIT (PDU) –Module 4 Optional
(Hardwired to Transformer Module)
MODEL
SC6RMPDU1
SC6RMPDU2
Input Voltage of UPS Module
208 or 240Vac
208 or 240Vac
Output Voltage through
Receptacles
208/120Vac or 240/120Vac
208Vac or 240Vac
Output Receptacles
(1) L6-30R, (1) L5-30R, (1) L5-20R, &
(2) 5-15/2020R
(1) L6-30R, (1) L6-20R & (4) 6-20R
Dimensions (H x W x D)
3.5” x 12.8” x 2.8” (2U)
Weight (l bs.)
7
COMMUNICATIONS
(Optional)
SCNET-INT
SNMP/WEB Network Card
SCContact/EPO
Dry Contact & EPO Card
Note: (2) slots available; both cards can be used simultaneously; RS232 Port is disabled when communication cards
are installed.
EXTENDED BATTERY PACK CHARGER
(Optional)
SCCHG1000
1000W External Mount Battery Charger (1)
charger per every (2) External Battery
Packs Required
6.6”W x 11.1”D x 3.4”H
7 lbs.
**PARALLEL FOR CAPACITY/REDUNDANCY
(4 Units maximum)
SG-PKIT-2
Parallel Distribution Bypass 60Amp for (2)
UPS Modules
10.5”W x 9.5”D x 3.7”H
11 lbs.
SG-PKIT-4
Parallel Distribution Bypass 120Amp for (4)
UPS Modules
10.5”W x 16.4”D x
3.7”H
20 lbs.
* Modules 1, 2 & 3 make up a complete hardwired 208/120Vac or 240/120Vac output system.
** Parallel for capacity configurations can use (1) battery system sized for the ultimate capacity.
**Parallel for redundancy configurations require (1) battery system for each UPS.
41
8.1.1
LIMITED W ARRANTY FOR UniStar III U NINTERRUPTIBLE P OWER SUPPY – DEPOT
REPAIR OR REPLACE. This Warranty is given ONLY to purchasers who buy for commercial or
industrial use in the ordinary course of each purchaser’s business: USA & Canada.
General:
Staco Energy Products Co. (“Staco”) products and systems are in our opinion the finest available. We
take pride in our products and are pleased that you have chosen them. Under certain circumstances
we offer with our products the following Warranty against Defects in Material and Workmanship
.
Warranty period is three (3) years from date of installation (max 42 months from ship date) for UniStar
III, and two (2) year from date of installation (max 30 months from ship date) for UniStar III P.
Please read your Warranty carefully. This Warranty sets forth our responsibilities in the unlikely event
of defect and tells you how to obtain performance under this Warranty.
Terms of Warranty:
As provided herein, the Staco product is warranted to be free of defects in material and workmanship
for a period defined above. If any part or portion of the Staco product fails to conform to the warranty
within the warranty period, Staco, at its option, will furnish new or factory remanufactured part(s) for
repair or replacement of that portion or part.
Warranty Extends to First Purchaser for Use, Non-transferable:
This Warranty is extended to the first person, firm, association or corporation for whom the Staco
product specified herein is originally installed for use in the United States (the “User”). This Warranty is
not transferable or assignable without the prior written permission of Staco.
Warranty Claims Procedure:
Within a reasonable time, but in no case to exceed sixty (60) days, after User’s discovery of a defect,
User shall contact Staco Field Services at 1-866-261-1191. Subject to the limitations specified herein,
nonconforming may be returned to Staco for repair or replacement, at Staco’s discretion, without
charge for material or labor. All returns must be shipped freight prepaid to Staco Energy products Co.
Staco will pay freight charges from factory to customer domestic (US and Canada) location. In the
event that the nonconforming unit is not returned, User may be billed for new unit replacement cost.
Items Not Covered By Warranty:
THIS WARRANTY DOES NOT COVER DAMAGE OR DEFECT CAUSED BY misuse, improper
application, wrong or inadequate electrical current or connection, inadequate water or drain services,
negligence, repair by non-Staco designated personnel, accident in transit, tampering, alterations, a
change in location or operating use, exposure to the elements, acts of nature, theft or installation
contrary to Staco’s recommendations, or in any event if the Staco serial number label or tag has been
altered, defaced, or removed.
THIS WARRANTY DOES NOT COVER return shipping costs, installation costs, circuit breaker
resetting or maintenance or service items and further, except as may be provided herein, does NOT
include labor costs or transportation charges arising from the replacement of the Staco product or any
part thereof or charges to remove the same from premises of User.
REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT OR PART THEREOF DOES NOT
EXTEND THE ORIGINAL WARRANTY PERIOD.
