STEP 3
01538 387960
Step 1. (foot)
Attach the front foot (6) to the frame using the bolt (3), washer (4)
and nut (5).
Step 2. (foot)
Attach the rear foot (2) to the frame using the bolt (3),
washer (4) and nut (5).
Step 3. (pedals)
Attach the pedals (7R/7L) into the crank arms (62R/62L), Each
pedal is marked with the letter R (right) or L (left) to denote the
side of the bike that they are on. NOTE: the right hand crank is on
the same side as the right belt cover (72). Be careful to align the
threads correctly to avoid any damage. A little grease on the
thread should help the pedals to screw in easily and correctly.
Tighten using a 15mm spanner, both pedals threads should
tighten towards the front of the bike.
ASSEMBLY
STEP 1
STEP 2
STEP 3
