8
ASSEMBLY
1.
Place the two Rack Feet on one end of the Drum Rack assembly, then use the
included M6 tool to tighten the clamps to secure them in place. Stand the assembly
up on its feet.
2.
Swing the Snare Drum Joint (left side arm of the Drum Rack assembly) and the Tom
3 Joint (right side arm of the Drum Rack assembly) out to the positions shown
above, then use the included M6 tool to tighten the clamps to secure them in place.
3.
Slide the HH Joint onto the left leg of the Drum Rack assembly to the position
shown above, then use the included M6 tool to tighten the clamp to secure it in
place.
4.
Slide the T1 T2 Rail onto the two legs of the Drum Rack assembly, then use the
included M6 tool to tighten the clamps to secure it in place.
Summary of Contents for 625921
Page 1: ...5 piece Electronic Drum Kit P N 625921 User s Manual...
Page 5: ...5...
