USER MANUAL
19
Attention In preprogrammed standalone MUSIC SHOW mode, the
laser beam will be blank-out in 3 seconds without
AUDIO/MIC activated signal.
DMX MODE
z
Press FUNC to enter MODE OPTION
z
Till to DMX address shown on LCD monitor.
z
Press UP/DOWN to change the DMX
address that you wanted.
z
Press ENTER to confirm the laser
to show the present mode at the
next operation.
Attention When the laser is connected with DMX controlled or under
control by DMX signal, the DMX indicated LED on front
panel is in RED.
SLAVE MODE
z
Press FUNC to enter MODE OPTION
z
Till to SLAVE shown on LCD monitor.
Connect MASTER and SLAVE lasers with DMX cable. The SLAVE lasers are
in SLAVE MODE. Check
XLR Control cable connection
section for your
reference.
z
Press ENTER to confirm the laser to show the present mode at the next
operation.
Scanned World Mirror Setting
z
Press FUNC to enter MODE OPTION
z
Till to MIRROR shown on LCD monitor.
z
Press UP/DOWN to change scanned world mirror.
UP is for Y direction mirror setting and
DOWN is for X direction mirror setting.
z
Press ENTER to confirm the laser to show
the present mode at the next operation.