USER MANUAL
7
z
Always disconnect from the mains, when the devise is not in use or before
cleaning it. Only handle the power-cord by the plug. Never pull out the plug by
tugging the power-cord.
z
It is essential to connect the yellow/green conductor to earth.
z
The electric connection, repairs and servicing must be carried out by a
qualified employee.
z
Do not switch the fixture on and off in short intervals as this would reduce the
laser diode life.
z
For replacement, please use fuses of same type and rating only.
z
If the device has been exposed to drastic temperature fluctuation, do not
switch it on immediately. The arising condensation water might damage your
device. Leave the device switched off until it has reached room temperature..
z
Do not shake the device. Avoid brute force when installing or operating the
device.
z
When choosing the installation-spot, please make sure that the device is not
exposed to extreme heat, moisture or dust. There should not be any cables
lying around. You endanger your own and the safety of others!
z
The minimum distance between the fixture and surrounding walls must be
more than 50cm.
z
Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at
the safety-rope only.
z
The ambient temperature must be between 10
℃
to 40
℃
.
z
Please use the original packaging if the device is to be transported.
z
Please consider that unauthorized modifications on the device are forbidden
due to safety reasons!
CAUTION! Operate the device only after having familiarized with
its
functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the
result of unprofessional operation
CAUTION! If this device will be operated in any way different to the
one described in this manual, the product may suffer
damages and the warranty word.
