STAGEMOTION, S.L.
C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain)
C.I.F.: ES-B47584982
Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com -
info@stagemotion.com
P
a
g
e
11
We strongly recommend to first test the reception quality of the chosen mounting position of the
antennas before final installation! See “Appendix B – Antenna positioning” for additional information.
The C3-IRSET consists of the external C3C-SENSOR IR-sensor and the C3C-RC
IR-remote control and can be used to control the dvbLOGiC’s internal DVB-T tuner functions
additionally to the control through the navigations buttons. Connect the C3C-SENSOR to the female
black/red/blue 3pin AMP connector of harness
DT2C-LR02 and locate the sensor in an accessible place.
Note:
To use the teletext function of the dvbLOGiC’s internal DVB-T tuner and the internal USB-AV-
player, the C3-IRSET is necessary.
USB-AV-Player
1.
Connect the USB extension USBC-EXT to the USB-port on the rear of the tuner-box DT2C-M717.
2.
Connect USB-media (up to 2TB, FAT32 and NTFS) to the USB-port of the USB-extension cable
USBC-EXT.
Connecting peripheral devices
It is possible to connect rear-seat-entertainment and a Conex converter to the dvbLOGiC Tuner.
Before final installation of the peripheral devices, we recommend to test-run the dvbLOGiC functions to detect
incompatibility of vehicle, navigation, factory accessories or peripheral devices as soon as possible.
