HOW TO CONFIGURE THE CONSOLE continued
21
HOW TO PAIR THE CONSOLE
IMPORTANT: The console must be paired to a
power meter. The console cannot pair to more than
one power meter at a time.
Pairing allows the console to communicate with a
power meter mounted to the exercise bike. The pairing
process uses ANT+ digital wireless technology to link
the console to the power meter.
IMPORTANT: It is strongly recommended that each
exercise bike in a fitness club be numbered for easy
identification. To communicate properly, a paired
console and power meter must be mounted to the
same exercise bike. To make sure that the correct
console stays with the correct power meter and
exercise bike, you can assign an identification
number to the console (see HOW TO USE A BIKE
NUMBER on page 30).
1. Make sure that fresh batteries are installed in
the console and the power meter.
See HOW TO REPLACE BATTERIES on page 31.
2. Locate the unique ANT+ number on the power
meter.
The ANT+ ID number is located in three places on
the power meter.
3. Activate the console and select the PAIRING
menu option.
See HOW TO ACTIVATE THE CONSOLE on page 11.
Then, see HOW TO USE THE SETTINGS MODE
on page 20.
The pairing menu will appear in the message
banner.
ANT+ ID #
ANT+ ID #
ANT+ ID #
ANT+ ID #
