On Board System Menu
The SLI FLATSET1 comes
with an easy to navigate system menu. This section
will detail the functions of each command in the system menu.
Please read this
section thoroughly!
To access the main
menu press the ESC button. Press the UP or DOWN button
until you reach the function you wish to change. When you reach the function
you wish to change press the ENTER button
.
When a function is selected, use
the
UP or Down button to change the function set
tings. Once your changes are
made, press the ENTER button.
Addr
-
DMX Address Setting
via
control board
1. Press the ESC button and UP
or DOWN button until “Addr” is
displayed, then press ENTER.
2. “Axxx
” will now be displayed,
“x” representing the displayed
address. Press the UP or DOWN
button to find your desired
address.
Auto
-
This menu will let you
select your desired auto mode
1. Press the ESC button and UP
button or DOWN button until
“Auto” is
displayed, then press
ENTER.
2. “Autx” will now be displayed.
You can confirm auto mode by
pressing UP or DOWN.
