ChAS
-
This menu will let you select your desired chase mode
1. Press the ESC button and UP button or DOWN button
until “ChAS” is
displayed,
then press ENTER.
2. “C x” will now be displayed. You can confirm chase modes by pressing UP or
DOWN.
3. Then press ENTER; “sp x” will be displayed ,
“x” representing a number
between 1
-
9. Press the UP or DOWN button to set the chase speed.
Colo
-
This menu will let you select your desired colour mode
1. Press the ESC button and UP or DOWN button until “CoLo” is displayed, then
press ENTER.
2. Either “CoL X” (“X” representing a number between 1
-
9), or “AtF
” will be
displayed. Press the UP or DOWN button to select either a static colour or “AtF ”
mode. If you select “AtF , and press ENTER, it will set the Red brightness, the
green brightness and the blue brightness.
Chnd
-
This menu will let you select yo
ur desired DMX Channel mode
1. Press the ESC button and UP button DOWN button
until “Chnd” is displayed,
then press ENTER.
2. “X Ch” will now be displayed, “X” representing the displayed DMX channel
mode. Press the UP or DOWN button to find your desired Ch
annel mode.
SLav
-
This menu will let you select your desired Master/Slave mode
1. Press the MENU button until “SLav” is displayed, press ENTER.
VER
-
This will display the software version
1. Press the MENU button until “VER” is displayed. Press the ENTER button and
the software version will be displayed.
