1
2
Place a head on the floor tom.
d. Floor tom & 10” tom-tom
Floor tom
Leg x 3 pcs
12” Head x2 pcs
Hoop x2 pcs
drum key x1 pc
Tension rod & spacer x 8 pcs
3
5
4
6
Place the hoop onto the head.
Screw the tension rod to the lug.
NOTE: DO NOT FULLY TIGHTEN
Use the drum key to tune the tension rod.
Note: Do not fully tighten one rod at a time.
Please tune rods in the diametrical order as above.
Repeat several times until the tension of each rod is
equal. The higher tension you tune , the higher pitch
it would sound
Repeat the same procedure on the
other side until all lugs are half screwed.
Rod
Spacer
Hoop
Lug
The holes on the hoop
should be straight to the lug
1st
2nd
3rd
4th
7
8
Insert the floor tom legs into the leg
bracket to appropriate height and tighten.
