Transport and Storage
8
279954 / 944260310110
2022-05-04·BA00·III·en·00
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
CPU module for Zone 1
Series 9442/32
3.3.2 Damage to electrical Components
Sensitive electronic components can be damaged by electrostatic discharge (ESD).
▶
Before making contact with the device, discharge the charge to a grounded metal body.
▶
Avoid direct contact with connectors or the contacts on the module slots.
▶
Clean the device only with a damp cloth.
▶
Only transport the device in special transport packaging that reliably protects the device
from external influences. Observe the ambient conditions when selecting the transport
packaging (see the "Technical data" chapter).
4
Transport and Storage
▶
Transport and store the device carefully and only in accordance with the safety information
(see "Safety" chapter).
5
Product Selection and Project Engineering
During new project engineering or modification of an IS1+ Remote I/O system, the following
conditions are to be taken into account and adhered to:
Mode of operation
The CPU communicates with the installed I/O modules over the socket and the address and
data lines of the BusRail. The configuration, parameterisation and diagnostics of the system
and the connected field devices are carried out over PROFIBUS DP and over the IS1+ GSD
or, for PROFINET, over GSDML and (optionally) the IS1+ DTM (read-only), and over
IS1+ DTM for Modbus TCP and using the EDS and the IS1+ DTM for EtherNet/IP.
A web server is also available for commissioning support, troubleshooting and firmware
updates.
All communication interfaces of the CPU are designed to be intrinsically safe.
Function replacement for the 9441/12 IS1 Ethernet CPU (with 9444/12 PM and
9492/12 socket) and 9440/22 IS1 fieldbus CPM (with 9490/1x-12 socket).
Summary of Contents for 279953
Page 32: ......