303049 / 825060300230
2022-05-30·BA00·III·en·00
Transport and Storage
7
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
Ex d enclosure made of aluminium/flameproof enclosure
8250/0 series empty enclosure,
8250/1 series terminal box,
8250/5 series control panel/control station
Impairment of Ex protection
When installed properly and completely, the device will have the required IP degree of
protection. Making structural modifications to the device or mounting it improperly can impair
its IP protection. This may result in explosions causing serious or even fatal injury.
▶
Attach plates (externally) without drilling any additional drilled holes.
▶
If any drilled holes are needed for add-on components in the enclosure or cover,
always have these drilled by R. STAHL.
▶
Install the device only in the prescribed mounting position. More detailed explanations of
this can be found in the "Installation" chapter or in the specification.
Improper installation, commissioning, maintenance or cleaning
Basic work such as installation, commissioning, maintenance or cleaning of the device must
be performed only in accordance with the applicable national regulations of the country of use
and only by qualified persons. Otherwise, the explosion protection may be rendered
ineffective. This may result in explosions causing serious or even fatal injury.
▶
Only have mounting, installation, commissioning and maintenance work performed by
qualified and authorised persons (see chapter 3.2).
▶
Only make modifications to the device in accordance with the directions in these operating
instructions. Have R. STAHL or a test body (third-party inspection) carry out acceptance
testing on any modifications made.
▶
Perform maintenance and repairs on the device only using original spare parts and after
consultation with R. STAHL.
▶
Gently clean the device with a damp cloth only – do not use scratching, abrasive or
aggressive cleaning agents or solutions.
▶
Never clean the device with a strong water jet, e.g. a pressure washer!
3.3.2 Risk of Injury
Falling devices or components
The heavy device or components can fall during transport and mounting, causing severe
injury to persons in the form of bruises and contusions.
▶
Use transporting and lifting equipment suitable for the size and weight of the device when
transporting and mounting it.
▶
Observe the weight and the maximum load-bearing capacity of the device;
see specifications on the shipping label or on the packaging.
▶
Use suitable mounting materials for mounting.
4
Transport and Storage
▶
Transport and store the device carefully and only in accordance with the safety information
(see "Safety" chapter).