Operation, Installation and Maintenance Manual for 6018/11 - Series
ID-No.:
226765 / 6018605300
Publication Code: 2017-08-31:BA00.lll.en.02 Page - 9 - of 22
NOTE
Risk of deep battery discharge due to exceeded storage!
Non-compliance can result in material damage!
•
The battery should be charged within 26 weeks from date of production by means of operating the luminaire.
7
Mounting & Installation Notes
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
•
Carry out installation strictly according to the instructions and national safety and accident prevention regulations to maintain the explosion
protection.
•
Select and install the electrical device so that explosion protection is not affected due to external influences, i.e. pressure conditions,
chemical, mechanical, thermal and electric impact such as vibration, humidity and corrosion (see IEC/EN 60079-14).
•
The device must only be installed by trained qualified personnel who is familiar with the relevant standards.
7.1
Dimensions / fastening dimensions
(All Dimensions in mm [inch]) - Subject to Alterations
2 - M8 Threaded hole for fixing
7.2
Mounting / dismounting, operating position
•
This device is mainly designed for indoor use.
•
The luminaire is been developed for Wall / Ceiling or Pendent mounting.
•
Different Mounting options are possible like:
Pendent Mounting
:
With the help of Ring bolt M8
Recessed Mounting
:
With Flushing Frame or Without Flushing Frame.
Wall Mounting
:
With Mounting Accessory 6.1.for 280mm width
2X18W
2X36W
L1
913
1643
L2
500
1250
L3
280
280
