Returning the device
20
202161 / 815060300020
2016-12-13·BA00·III·en·05
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Terminal Box
Series 8150/1, Series 8150/2
9
Returning the device
Only return or package the devices after consulting R. STAHL!
Contact the responsible representative at R. STAHL for this.
R. STAHL's customer service is available to handle returns if repair or service is required.
Contact customer service personally.
or
Go to the www.stahl.com website.
Select "Downloads" > Customer service > "RMA Request".
Fill out the form.
Wait for confirmation. R. STAHL's customer service will contact you.
You will receive an RMA slip after speaking with customer service.
Send the device along with the RMA slip in the packaging to R. STAHL Schaltgeräte
GmbH (refer to Section 1.1 for the address).
10
Cleaning
Check the device for damage before and after cleaning it. Take damaged devices out
of operation immediately.
To avoid electrostatic charging, the devices located in hazardous areas may only
be cleaned using a damp cloth.
When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
Do not use aggressive detergents or solvents.
Never clean the device with a strong water jet, e.g. using a high-pressure washer!
11
Disposal
Observe national and local regulations and statutory regulations regarding disposal.
Separate materials when sending them for recycling.
Ensure environmentally friendly disposal of all components according to the statutory
regulations.
12
Accessories and Spare parts
Only return or package the devices after contacting and consulting R. STAHL!
NOTICE! Malfunction or damage to the device due to the use of non-original components.
Non-compliance can result in material damage.
Use only original accessories and spare parts from R. STAHL Schaltgeräte GmbH
(see data sheet).
