Mounting and Installation
14
203681 / 818660300010
2020-06-23·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Optical Fibre Splice Cassette Zone 1
Series 8186
8.3
Installation
Before connection
• Ensure that all voltage sources are switched off and secured against unintentional
reactivation.
• Ensure that the FO splice cassette is clean and undamaged.
• Ensure that the specified minimum bend radius (35 mm) is complied with.
8.3.1 Laying Fibre Optics
Inside the FO splice cassette, the fibre optics can be laid as follows:
21486E00
The fibre optics must only be installed with the associated splice protector
holders with shrink splice protector.
Accessories set (item no. 203682):
1 x splice protector holder, 6 x shrink splice protector, 4 x cable tie
Outside the FO splice cassette, the minimum bend radii specified by the
cable manufacturer must be observed.
