226774 / 8188601300
2016-04-05·BA00·III·en·04
Safety Notes
5
Busbar system
Series 8188
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3
Safety Notes
3.1
Operating Instructions Storage
• Read the operating instructions carefully and store them at the mounting location of
the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2
Safe Use
• Read and observe the safety notes in these operating instructions!
• Use the device in accordance with its intended and approved purpose only.
• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.
• Before installation and commissioning, make sure that the device is not damaged.
• Work on the device (installation, maintenance, overhaul, repair) may only be carried
out by appropriately authorized and trained personnel.
• During installation and operation observe the information (characteristic values and
rated operating conditions) on the rating, data and information plates located on the
device.
• Always consult with R. STAHL Schaltgeräte GmbH in case of operating conditions
which deviate from the technical data.
3.3
Modifications and Alterations
4
Function and Device Design
4.1
Function
The busbar system for switchgear combinations in multiple enclosure design consists of
empty enclosures Series 8125, 8150 or 8146 and built-in busbars, enclosure
combinations are also possible. It is used to connect conductors in devices and
connection chambers of type of protection Increased safety "e".
WARNING
Danger due to modifications and alterations to the device!
Explosion protection is impaired!
• Do not modify or change the device.
• No liability or warranty for damage resulting from modifications and
alterations.
WARNING
Danger due to improper use!
Explosion protection is impaired!
• The device may only be used according to the operating conditions
described in these operating instructions.
