146710 / 8523612300
2018-07-02·BA00·III·en·08
Cleaning
11
Motor protection circuit-breaker
8523/8
10.1 Regular Maintenance Work
Consult the relevant national regulations (e.g. IEC/EN 60079-17) to determine the type
and extent of inspections.
Plan the intervals such that any expected defects in the equipment are detected
promptly.
To check as part of maintenance:
Check if the cables are clamped properly.
Inspect the device for signs of visible damage.
Compliance with the permitted temperatures in accordance with IEC/EN 60079-0.
Make sure that the device is used according to its designated use.
Make sure the operating handle can be reset.
11 Cleaning
Clean with a cloth, brush, vacuum cleaner or similar items.
When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
Never use aggressive cleaning agents or solvents.
12 Disposal
Observe the national waste disposal regulations.
13 Accessories and Spare Parts
WARNING
If wrong accessories are used, explosion protection cannot be
guaranteed!
Use only original R. STAHL accessories and spare parts.
Designation
Illustration
Description
Art. no.
Weight
kg
Jumper
04951E00
for undervoltage release, length 400 mm
147121
0.019