Safety
4
261661 / 8602620300
2017-06-01·BA00·III·en·00
Actuator modification kit
Series 8602/1
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3
Safety
Qualified specialist personnel are required to perform the activities described in these
modification instructions. This primarily applies to work in the following areas:
• Product selection, project engineering and modification
• Mounting/dismounting the device
• Installation
• Commissioning
• Maintenance, repair, cleaning
Specialists who perform these tasks must have a level of knowledge that meets
applicable national standards and regulations.
Additional knowledge is required for tasks in hazardous areas! R. STAHL recommends
having a level of knowledge equal to that described in the following standards:
• IEC/EN 60079-14 (Electrical installations design, selection and erection)
• IEC/EN 60079-17 (Inspection and maintenance of electrical installations)
• IEC/EN 60079-19 (Equipment repair, overhaul and reclamation)
4
Safety notes
4.1
Modification instructions storage
• Read the modification instructions carefully and store them at the mounting location of
the device.
• Observe applicable documents and operating instructions of the devices
to be connected.
4.2
Safe use
Observe the following information during installation and operation:
- Any damage can invalidate the explosion protection
- National and local safety regulations
- National and local accident prevention regulations
- National and local assembly and installation regulations
- Generally recognized technical regulations
- Safety notes in these modification instructions
- Characteristic values and rated operating conditions on the rating plates and data
plates
- Additional information plates fixed directly to the device
• Do not damage circumferential seal.
4.3
Modifications and alterations
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only according to the operating conditions described in
these modification instructions.
Summary of Contents for 8602/1 Series
Page 8: ......
