english
Operating Instructions
Digital Output Loop Powered Type 9176
21
8.3.3. Mounting / Demounting on pac-Carrier
Please refer to the operating guide of the pac-Carrier type 9195.
8.3.4. Mounting / Dismounting detachable terminals
All devices are equipped with detachable terminals.
Dismounting
Place the screw driver between terminal and
enclosure.
Move the screw driver as described.
Mounting
Place the terminal into the terminal slot and press it towards the device until it is locked.
9 Commissioning
9.1 Connections
The connection scheme can be found printed on the device.
9.2 Settings
None
You may use a data base of I.S. solenoid valves and other field devices on
the homepage
Disclaimer:
R.STAHL cannot guarantee the compatibility between any of the
mentioned field devices and ISpac isolators. Please check the functional and
safety values as well.
10 Operation and operational states
Before commissioning the device, please ensure that:
the device has been installed in the correct slot and in accordance with the standards
the device is not damaged
the cables are properly connected
11 Maintenance and repair
It is recommended that all repairs to our devices be carried out by R. STAHL. In
exceptional cases, repair may be performed by approved third-parties.
The devices are maintenance-free.
If the procedure described above does not obtain the desired result, please contact your
local R. STAHL sales and service representative. In order to quickly process your request,
please provide us with the following information:
Type and serial number,
Purchase date(s),
Description of the error,
Application description (particularly the configuration of the
input/output circuitry)
