161936 / 941160310020
2015-09-15·BA00·III·en·08
Safety Notes
5
Zone 1 Ex e field device coupler
Series 9411/11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
2.3
Symbols on the Device
3
Safety Notes
3.1
Operating Instructions Storage
• Read the operating instructions carefully.
• Store the operating instructions at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2
Safe Use
Before mounting
• Read and observe the safety notes in these operating instructions!
• Ensure that the contents of these operating instructions have been fully understood by
the personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• Always consult with R. STAHL Schaltgeräte GmbH if using the device under operating
conditions which are not covered by the technical data.
• We cannot be held liable for damage caused by incorrect or unauthorized use of the
device, or for non-compliance with these operating instructions.
For mounting and installation
• Observe national installation regulations (e.g. IEC/EN 60079-14).
• Observe national safety and accident prevention regulations.
• During installation and operation, observe the information (characteristic values and
rated operating conditions) on the rating, data and information plates located on the
device.
• Before installation, make sure that the device is not damaged.
• Electric circuits with type of protection "Ex i" operated with circuits with other types of
protection can no longer be operated as circuits with type of protection "Ex i" after that.
Symbol
Meaning
05594E00
CE marking according to the currently applicable directive.
02198E00
Electric circuit according to marking approved for hazardous areas.
