Manual / Operating Instructions DOME Camera EC-750 Ex
Software function
R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_750_en_V_01_01_10.docx / 31.03.2017
Page 19 of 24
14 Software function
14.1 EC-750-aa-VI-cc
The camera variants EC-750-aa-VI-cc contains an analog CVBS output which can be
connected directly through each compatible CVBS input devices.
14.1.1
Protocol
The camera variants EC-750-aa-VI-cc supports the PTZ-functions of the Pelco D protocol.
Pelco D parameter:
Bus type RS-485
2400 baud
8 data bit
1 stop bit
no parity
The bus address of the camera is 1. These address can only be
changed by R. STAHL HMI Systems GmbH !
14.2 EC-750-aa-IP-cc
The camera variants EC-750-aa-IP-cc contains an integrated IP server. The video and data
transmission is done on an Ethernet connection via IP.
Inside the camera an AXIS 282 server video card is installed. This card integrates a Web server
which makes it possible to display the video on a computer and to reach the control of the
camera through the camera’s software.
The AXIS IP UTILITY enables you to find the IP addresses of the cameras which are connected
on your network. You can reach these cameras while entering the IP address in a web
navigator.
The login is:
root
The password is:
pass
For further details please refer to the Axis documentation.
14.2.1
Protocol
The settings at the AXIS board 282 must not be changed ! These
settings are the same as at the camera variant EC-750-aa-VI-cc. The
Device ID
MUST BE
1 !
NOTICE
NOTICE
DOCUMENTATION
Summary of Contents for EC-750 Series
Page 23: ......
