226877 / 661060300010
2015-02-06·BA00·III·en·00
Maintenance and repair
15
Linear Luminaire Sheet Steel for
Fluorescent Lamps
Series ECOLUX 6610
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
10.1.1 Replacement of lamps
Note:
• The lamp bases must be undamaged.
• Observe the fit of the lamp; the lamp fit will be locked after turning the lamp.
• Replace the lamps in due time.
• Observe the service life specified by the manufacturer.
• EOL- safety shutdown: The EB switches off the lamp at the end of the service life.
10.1.2 Cleaning
• Clean the device only with a damp cloth.
• Use water or mild cleaning agents.
• Do not use abrasive, scratching and aggressive detergents or solvents.
10.2 Returning the device
Use the "Service form" to return the device when repair/service is required. On the
internet site "www.stahl-ex.com" under "Downloads > Customer service":
• Download the service form and fill it out.
• Send the device along with the service form in the original packaging to
R. STAHL Schaltgeräte GmbH.
Only use fluorescent lamps with pins made of brass.
16735E00
• Insert both lamp bases of the lamp into the holder
slots as far as possible.
• Put the lamp into operating position by turning it to
the right or to the left.
• Dismounting is carried out in reverse order.
