background image

Explanation of the symbols

4

243137 / 640260300020

2015-12-22·BA00·III·en·05

Linear Luminaire with LED

Series EXLUX 6402/2

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

2

Explanation of the symbols

2.1

Symbols in these operating instructions

2.2

Warning notes

Warning notes must be observed under all circumstances, in order to minimize the risk 

due to construction and operation. The warning notes have the following structure:

• Signalling word: DANGER, WARNING, CAUTION, NOTICE

• Type and source of danger/damage

• Consequences of danger

• Taking countermeasures to avoid the danger/damage

Symbol

Meaning

Tips and recommendations on the use of the device

General danger

Danger due to explosive atmosphere

Danger due to energised parts

DANGER

Danger to persons

Non-compliance with the instruction results in severe or fatal injuries  

to persons.

WARNING

Danger to persons

Non-compliance with the instruction can result in severe or fatal injuries  

to persons.

CAUTION

Danger to persons

Non-compliance with the instruction can result in light injuries to persons.

NOTICE

Avoiding material damage

Non-compliance with the instruction can result in material damage to the device and / or 

its environment.

Summary of Contents for EXLUX 6402/2 Series
























Reviews: