255118 / 815060300340
2017-04-19·BA00·III·en·01
Mounting and installation
15
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Terminal box
Series G150/1
6
Mounting and installation
6.1
Mounting/dismounting, operating position
Mount the device carefully and only in accordance with the safety notes
(see chapter "Safety").
Read through the following installation conditions and assembly instructions carefully
and follow them precisely.
6.1.1 Operating position
Mount the device using the mounting straps. Refer to the dimensional drawing for the
dimensions of the mounting holes.
14282E00
6.1.2 Environmental installation conditions
Provide a protective roof or wall if the device is exposed to weather.
Do not create any cold bridges (risk of condensation). If necessary, mount the enclosure
with a clearance to reduce condensation in the enclosure to a minimum.
6.2
Installation
DANGER! Impairment of IP protection.
Non-compliance can result in damage to the enclosure.
Mount the device only on the floor or wall, not overhead or in a free-standing
position.
Mount the device torsion-free only on a level surface.
16523E00
• Alignment of enclosure depending
on mounting type:
• For vertical mounting: any
alignment
• For horizontal mounting: cover on
top
• Hanging position/overhanging
cover is not permitted!
Operation under difficult conditions, such as on ships or in strong sunlight, requires
additional measures to be taken for correct installation, depending on the place of use.
Further information and instructions on this can be obtained from your regional sales
contact on request.
25
7 [0,28]
18 [0,71]
26 [1,02]
20
X
ø [ø 0,28]
7
[0,98]
[0,79]
≦ 90°
