254914 / 640160300040
2017-12-01·BA00·III·en·02
Transport and storage
11
Linear Luminaire for Fluorescent Lamps
Series EXLUX 6401
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
6
Transport and storage
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
Through wiring
Assembly
Address module
Control input
(between D1 (L ) and D2 (N))
Nominal voltage: 220 ... 230 V AC; 50 ... 60 Hz
Voltage range: 198 ... 253 V AC; 50 ... 60 Hz
Function
Address and switching module for R. STAHL emergency lighting systems
according to VDE 0108:
The module is used for the monitoring of individual luminaires and for the
control of network and safety lights.
The module offers the following functions:
• Control of the luminaire (ON / OFF) and function test
• Up to 20 addresses can be configured for each electric circuit by
means of a coding switch
• The type of connection of the luminaire (continuous light, stand-by
light or switched light) is freely programmable
• Mixed operation within one circuit is possible
Technical Data
Through wiring Standard luminaire
Luminaires are equipped with internal through wiring.
Ingoing and outgoing leads can be connected on the
opposite sides.
Terminals for the address module are not included in the
through wiring.
Terminals: see Techn. data
Wiring cross-section: 2.5 mm
2
for max. 16 A
without
Optional
On the connection side, there are 2 bores M25 x 1.5 for cable
entries for ingoing and outgoing wiring of the connection line
(ingoing and outgoing leads on one side).
For outdoor mounting, a breather is recommended
Standard luminaire
Standard: 2 x M8 insert nuts in the enclosure
Special:
Mounting grooves in the enclosure for the use of fastening and
ceiling rails for variable luminaire mounting (variable mounting
distances for luminaires
18 W: 320 ... 480 mm;
36 W / 58 W: 670 ... 930 mm)
Ätna Zone II
PPW EX 34../..
