Safety
Operating Instructions ET-xx8 / MT-xx8
R. STAHL HMI Systems GmbH / OI_ET_MT-xx8_en_V_01_02_03.docx / 10.03.2021
Page 15 of 84
3
Safety
The device has been manufactured according to the state of the art of technology while observing
recognised safety-related rules. When using the device, it is nevertheless possible for hazards to
occur to life and limb of the user or third parties or for the device, environment or material assets
to be compromised.
Only use the device under the following conditions:
If it is not damaged
As intended, while remaining aware of safety and hazards
In accordance with these Operating Instructions
3.1
Intended use
The Series xx8 Shark device platform HMIs are operator stations suitable for industrial production
in hazardous areas.
Depending on their version, the devices are certified for the following hazardous areas:
Series xx8
Hazardous area
Directive
ET
Zone 1, 2, 21 and 22 (EPL Gb, Db)
Class I, Zone 1 & 2; Class I, Division 2; Zone
21 & 22
ATEX directive, IEC and
Canadian requirements
Class II, Division 2
acc. to American
requirements
MT
Zone 2 and 22 (EPL Gc, Dc) Class I,
Zone 2, Class I, Division 2, Zone 22
ATEX directive, IEC and
Canadian requirements
Class II, Division 2
acc. to American
requirements
The SHARK device platform has been designed with particular focus on the harsh conditions
prevalent in the oil and gas industry. The device can be used indoors as well as in outdoor areas.
It is shock, vibration, saltwater and salt-spray proof.
The approved operating temperature ranges depend on the version:
Standard:
from -10 °C to +65 °C
Outdoor installation (with integrated heater):
from -40 °C to +65 °C
Depending on their configuration, the following versions with the SHARK device platform are
available:
Panel PC - SERIES 400
Thin Clients - SERIES 500
KVM Systems (Keyboard - Video - Mouse) - SERIES 600
