225034 / 7570609300
2014-01-21·BA00·III·en·00
Commissioning
11
SolConeX Plug, 16 A
Series 7570/12
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
8
Commissioning
Before commissioning, ensure the following:
• Check the mounting and installation.
• Inspect enclosure for damage.
• If necessary, remove foreign objects.
• If necessary, clean the connection chamber.
• Check whether the cables have been inserted correctly.
• Check whether all screws and nuts have been tightened firmly.
• Check whether all conductors have been clamped firmly.
• Check whether all prescribed tightening torques have been observed.
• Check whether the bayonet lock has been tightened firmly.
• Make sure that the plug pin surface is not damaged.
• Use only in completely mounted state.
9
Operation
Check the functionality of the plug after any short-circuit in the electric circuit.
The plug can be used with the following products of R. STAHL:
• Wall-mounting sockets 7570/11 and 7575/11
• Flange sockets 7570/15 and 8571/15
The plug can be used with industrial type sockets (according to CEE standard).
WARNING
Check the device before commissioning!
Explosion protection is impaired!
• Observe the inspection requirements in the current national
regulations before commissioning in order to maintain the
explosion protection.
• Check the device for proper installation and function before
commissioning.
The plug may only be used when fully mounted.
Summary of Contents for SolConeX 7570/12 Series
