BAST_
02.FM
10
3 Installation
3.3 Installing trolley on chain hoist
(continued)
1. KFN 63
Fit suspension piece with suspension bolt (a) to chain hoist. Observe installation
position of suspension piece for 1/1 and 2/1 reeving! Lock bolt (a) with washer (b)
and circlip (c). See sketch
2. Slide trolley onto runway or push on from below after swivelling the side cheeks
up.
3. Check that screws and nuts are tightened with specified torque, see page
12.
4. The screw retentions must be fitted!
KFK ..
5. Turn wheel (d) by means of cam (e) until it is in contact with the running surface of
the runway.
Tighten screw (f).
N.B.:
The guide roller must be flush with the wheels.
a
b
c
f
e
d
d
W0761
KFN 63 2/1
KFK ..
KE-T 22
Wheel
Max. S.W.L.
[kg]
50
500
63
500 (KE-T)
63
1000
80
3200
125
6300
11.05