16. Insert the pedal securing bolts into each pedal (Fig. 17) thru the
back of each crank arm and torque each screw to its final value.
Hardware
QTY
M8x1.25x14mm Specialty Hex Screw
2
Final Torque
33-37 Lb-Ft (45-50 Nm)
Fig. 16
17. Locate the seat slider and mount the assembly (Fig. 18) onto the
seat post by sliding the post into the seat slider while pulling on the
pull pin under the seat slider.
Fig. 17
18. Install the corresponding stopper bolt (Fig. 19) into the slider section
of the seat post.
Hardware
QTY
M4 x10mm Socket Head Cap Screw
2
Fig. 18
Owner’s Manual
18
Summary of Contents for Air Fit
Page 1: ...Air Fit 620 8245 Owner s Manual Owner s Manual 1...
Page 29: ...Owner s Manual 29...
Page 30: ...Owner s Manual 30...
Page 31: ...Owner s Manual 31...
