31
4.25 Store a Blackout Scene
Blackout Scene is a special scene of Blackout mode set in By Black Scene.
1. Enter Program mode.
2. Press the number button1-20 to select one or more fixtures.
3. Move FADERS1-24 to vary the channel outputs or use Jog wheel #1, #2 to adjust
PAN and PAN FINE or use Jog wheel #3, #4 to adjust TILT, TILT FINE.
4. Once the effect is adjusted, press MANUAL/REC button to store, at this moment, all
LEDs on CUE, OVERRIDE, CENTRE, FIXTURE GROUP, PRESET, CHASE,
BANK, BLACKOUT blink at the same time.
5. Press BLACK OUT/STAND ALONE button, all LEDs blink for 3 times to indicate that
you have successfully stored a Black Scene.
6. Press PROGRAM button for 3 seconds to exit Program mode, the LED goes out
indicating this operation.
5. Setting Menu
Entering the Menu
1. Enter Program mode.
2. Press ENTER/MAIN MENU Button to enter LCD screen main menu.