6
1. Fog Machine Button
Activates Fog Machine.
2. STROBE Button
Trigger strobe.
3. Fixture Group Button
Select /set one or more fixtures group
4. Fixture Button
Select one or more fixtures
5. Preset Button
Select/set the colour & gobo preset.
6. Movement Button
Select/set the pan & tilt movement
7. Chase Button
Run Chase and save Scene to Chase
8. Cue Button
Save several Chases together and make them run at the same
time
9. Bank Button
Press the Bank buttons to load or stored your scenes. There are a
maximum of 1200 programmable scenes.
10. Override Button
Override the fixture/ fixtures when the show is running.
11. Centre Button
Select/set the pan & tilt centre.
12. Manual/Rec Button
Used to control manual operation or to record programs.
13. Program Button
Activates Program mode.
14. Music/Bank Copy Button
Activates Music mode or to copy a bank of scenes.
15. Tap/Insert Button
Used to create a standard beat or insert a scene to chase.
16. Auto/Del Button
Activates Auto mode or to delete scenes or chases.
17. Blackout/ Stand Alone Button
Select Blackout/Stand Alone two modes.
18. USB Light
Connect to USB Light
19. Faders
These faders are used to control the intensity.
20. CF card
CF card port can be used to upgrade software, copy data and
introduce to light bank
21. Stand alone
Extra easy controllers Incorporated for Master/Slave immediate
pre-programmed light shows.
22. Multi- function number buttons 1-20
Function buttons
The descriptions of the Function buttons
1
Fixture
Select 20 units of Fixtures Pls refer to the following
table for Fixture addresses
2
Fixture Group
Set or select 20 Fixture Groups
3
Movement
(only 1-10) Select or operate 10 Movements
4
Preset
20 groups of fixtures can be set or selected by Jog
wheel PAN .10 colour Preset(1-10) and 10 GOBO
Preset(11-20) each group
5
Cue
Set, select or operate 60 Cues
6
Chase
Set, select or operate 60 Chases
7
Override
Set and select 20 Overrides
8
Bank
60 banks( each bank with 20scenes) can be set and
selected by Jog wheel #1
9
centre
Set, select and operate 20 Centers
10
Number 1-20 button
1. 1-10 (10 stand for 0) Number for setting and input
-
ting password.
2. 1-10 10 MOVEMENT can be selected.
3. 1-10 can be used to select 10 groups of COLOUR
PRESET; 11-20 can be used to select another 10
groups of GOBO PRESET.
4. 1-20 can be used to select 20 CUE/PAGE CHASE/
PAGE SCENE/BANK OVERRIDE CENTRE FIX
-
TURE.
