DMXBUS-K
- Gateways
Programming manual
v2.1.2
www.besknx.c
z
6
3.4
Adding DMX lights
3.4.1
Device type
To include a DMX light in the ETS project it is necessary to add to the gateway memory a number of
Dimmer
applications.
Each application will control a DMX light depending on the parameters configured.
We have to configure the DMX address of each light in the corresponding application. To do so, from the topology window,
do right click on the device and select Edit parameters / General.
The device
type parameter
allows selecting the corresponding device that will be programmed by the application. The ETS
will show or hide communication objects and parameters according to this parameter. In this case the device that must be
selected is Dimmers DMX Channel.
Some parameters can be hidden depending on the device selected or the previous configuration. The description of the
DMXBUS-K parameters is shown next:
