- 4 -
3. STRUCTURE OF THE DEVICE
Dociskacz
Śruba
Tulejka
Pokrywa
Rączka
Osłona silnika
Przełącznik
Wyciskacz
Filtr
Zbiornik
Owoc
4. SETTING UP THE DEVICE
4.1. Connecting power supply
This device should be connected to a source of electricity using the supplied plug. The socket should be grounded and
equipped with a residual current device.
4.2. Placement of the device
The device should be set up on an even, stable surface.
5. OPERATING THE DEVICE
1.
Set the juicer cone in the right place,
2.
Place the a container for juice on the drain,
3.
Cut the fruit in half,
4.
Switch the device on by turning the on-off switch to I,
5.
Press the fruit on the juicer cone to obtain juice,
6.
Switch the device off when finished.
6. CLEANING AND MAINTENANCE
a. Before cleaning the device:
•
Set the power switch to “0”
•
Disconnect the device from electricity
The device should be cleaned after each use. Elements of the device should be cleaned regardless of whether they were in
contact with the fruit or juice, or they remained unused.
It is now allowed for the device to be cleaned with running water or in an industrial washer. It is also not allowed to use
brushes or other cleaning tools which may damage surface of the device. To wash this device use water and a neutral
detergent.
b. Cleaning of the bowl, the juicer cone and the juice container
In order to clean the bowl and the juicer cone take both the elements off the device carefully. After removing from the device
wash the elements with hot water and some neutral detergent. After washing the parts rinse and dry them carefully.
Fig. 1
Fig. 2
Fig. 1
Handle (rączka)
Lid (pokrywa)
Bushing (tuleja)
Pusher (dociskacz)
Screw (śruba)
engine housing (osłona silnika)
switch (przełącznik)
juicer cone (wyciskacz)
filter (filtr)
container (zbiornik)
Fig. 2
Fruit (owoc)
480021 wyciskarka en.indd 4
2015-04-21 15:59:22
