- 12 -
EN
Step 4:
Pass the power cord plug through the base post, center post, and inner top post. Plug the power cord plug into the soc-
ket on the lamp head.
Step 5:
Place the lamp head on the top post and secure it with two 2x8mm screws.
Step 6:
Attach the power cable to the rubber base using two M4X30 and two M4x50 screws.
Step 7:
Slide the top post in or out to the desired height and attach to the center post by turning the attachment knob.
Step 8:
Place the heating umbrella on the floor. Drill three holes in the floor, fix the unit with three wedge bolts, tightening them
with a wrench.
Assembly completed.
