background image

- 6 -

7.  FAULTS, CAUSES, SOLUTIONS

In the event of any disturbing behaviors during the operation of the device, please contact your authorized service center or 

the seller.

8.  DISPOSING OF USED EQUIPMENT

You can return your old device after the end of use or when buying a new device at Stalgast. Send the device to us and a 

specialized company will dispose of it in accordance with the Waste Electrical and Electronic Equipment Act (Journal of Laws 

of 2005, No. 180, item 1495).

9.  WARRANTY

The seller shall be liable under the warranty or guarantee.

In the event of damages resulting from the formation of limescale deposits in the device, they are not subject to repair under 

warranty. The warranty also does not cover damages caused by external forces such as lightning, changes in supply voltage, 

incorrect setting of the voltage value, supply from an inadequate power outlet, mechanical, thermal, chemical damages to the 

equipment and the defects caused by them.

Warranty exchange does not cover such elements as: light bulbs, rubber components, heating elements damaged by lime 

scale, screws and elements undergoing natural wear, e.g. burners, rubber seals and all kinds of mechanically damaged 

elements.

Summary of Contents for 721124







Reviews: