- 4 -
3. STRUCTURE OF THE DEVICE
4. INSTRUCTION
4.1. Operating panel
Switches of the
heating elements
Timer
4.2. Assembly instruction
The installation procedures must be performed by a qualified technician in accordance with the currently applicable laws and
standards. After removing the device from the packaging, peel off the adhesive film protecting the steel. Any glue residues
must be carefully removed (do not use abrasive cleaning agents). The device should be leveled using the adjustable feet. The
device is adapted for operation with a network power supply whose characteristics are compatible with those specified on
the nameplate. In the power cord, the ground connector is color-coded in yellow and green. The device has a power cord
intended for use with a power supply whose properties are compatible with those specified on the nameplate. The device
should be connected to a power supply with a voltage of 230 V and is equipped with a Schunk plug.
Before connecting the device, please make sure that:
a. The magneto-thermal switch can withstand the load of the device (see: nameplate);
b. The source of power supply has a socket with grounding with appropriate properties.
c. The socket or the switch used for the connection are easily accessible from the device.
