Stamina 15-0199, Owner'S Manual

OPERATIONAL INSTRUCTIONS

11

USING THE FITNESS METER

Automatically scans each function of 

TIME, SPEED, DISTANCE,

CALORIES, 

and  

ODOMETER 

in sequence, display changes every six seconds. Press and release the 

button until 

"SCAN"

 appears on the display.

Displays the time from one second up to 99:59 minutes.

Displays the current speed from zero to 999.9 miles per hour.

Displays the distance from zero to 999.9 miles.

Displays the calories burned from zero to 999.9 Kcal.

The calorie readout is an estimate for an average user. It should be used only as a 

comparison between workouts on this unit.

Displays the total accumulated distance you have traveled from zero to 9999 miles. The 

total accumulated distance is retained when the meter is turned off.

FUNCTIONS:

SCAN:

TIME:

SPEED:

DISTANCE:

CALORIES:

ODOMETER:

Pedal movement or press the button.
Automatically shuts off after four minutes of 

inactivity.

POWER  ON :

POWER OFF :

MODE BUTTON:

Press to select display functions, including 

SCAN, TIME, 

SPEED, DISTANCE, CALORIES, 

and 

ODOMETER.

Press and hold for three seconds to reset all functions to 

zero, except

 ODOMETER

.

The 

ODOMETER

 will be reset to zero after batteries are removed for battery replacement 

or storage of the unit.

NOTE:

AAA Batteries

1.  Do not mix a new battery with an old battery.

2.  Use  the  same  type  of  battery.  Do  not  mix  an  alkaline 

battery with another type of battery.

3.  Rechargeable batteries are not recommended.

4. Ultimate disposal of battery should be handled 

according to all state and federal laws and regulations.

5.  Do not dispose of batteries in fire.

NOTE:

1.  Open the Battery Door on the back of the meter.

2. The meter operates with two AAA batteries, the batteries are not 

included. Refer to the illustration to install or replace the batteries.

HOW TO INSTALL AND REPLACE BATTERIES: