Stamina 15-0199, Owner'S Manual

ASSEMBLY INSTRUCTIONS

7

STEP 1

Refer to illustration below. Remove the 

BALL PIN(42)

 from the 

REAR FRAME(2). 

Unfold  the 

REAR 

FRAME(2)

 away from the 

MAIN FRAME(1).

 Lock the frame assembly in unfolded position by inserting the 

BALL PIN(42) 

into the upper hole in the 

REAR FRAME(2).

STEP 2  

Attach the 

STABILIZER(7),

 the one with 

LEVELING CAPS(80),

 to the 

REAR FRAME(2)

 with 

CARRIAGE 

BOLTS(M8x1.25x60mm)(45), ACORN NUTS(M8x1.25)(46), 

and 

ARC WASHERS(M8)(47).

STEP 3

Attach the 

STABILIZER(7),

 the one with 

ENDCAPS(11),

 to the 

MAIN FRAME(1)

 with 

CARRIAGE BOLTS 

(M8x1.25x60mm)(45), ACORN NUTS(M8x1.25)(46), 

and 

ARC WASHERS(M8)(47).

Insert the pin into the upper 

hole to lock the frames in 

unfolded position.

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove 

all packing materials from your area and place them back into the box. Do not dispose of the packing 

materials until assembly is completed. Read each step carefully before beginning. If you are missing 

a part, please go to staminaproducts.com under the Service section and order the part needed, 

e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). 

Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday 

through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.