FUNCTION INSPECTION:
Visually inspect the
UX2 AIR BIKE
to verify that assembly is as shown in the above illustration. Check the
function of the
UX2 AIR BIKE.
Turn the crank slowly through one complete revolution to verify that the drive
chain functions properly. Adjust the
TENSION KNOB(27)
and verify that it functions properly.
CAUTION:
SET UP INSTRUCTIONS
Place the
UX2 AIR BIKE
in the area where it will be used. It is recommended that the
UX2 AIR BIKE
be
placed on an equipment mat. The
UX2 AIR BIKE
is approximately 42 1/2" long x 22 1/4" wide x 45 1/4" tall.
(These dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation
of the
UX2 AIR BIKE.
Make sure that adequate space is available for access to and passage around the
UX2 AIR BIKE.
LEVELING:
MOVING:
10
Locate and read the
WARNING LABEL(77)
on the
UX2 AIR BIKE.
Make sure that all users
read the
WARNING LABEL(77).
Equipment Mat
Use the
LEVELING CAPS(48)
on the
FRONT STABILIZER(3)
to level the
UX2 AIR BIKE
so
there is no movement or rocking during your workout. Remove and reposition the
LEVELING
CAPS(48)
so the flat side of both caps are in contact with the floor.
To move the
UX2 AIR BIKE
, it is recommended that two people move the bike together.
