ASSEMBLY INSTRUCTIONS
9
Push
PEDAL BUSHINGS(33),
with
SHOULDER
facing outside, into
LINKAGE CONNECTORS(75).
Insert
PEDAL SHAFTS
of
PEDALS(31, 32)
through
SHOULDER
side of
PEDAL BUSHINGS(33).
Slide
SPACERS(34)
onto
PEDAL SHAFTS.
WARNING:
SPACERS(34)
must be between
PEDAL BUSHINGS(33)
and
CRANK(10)
so that there will
be enough clearance between
LINKAGES(9, 74)
and
CRANK(10).
Thread
PEDAL SHAFTS
of
PEDALS(31, 32)
into
CRANK(10)
and tighten.
Hold
PEDAL SHAFTS
with wrench and thread
THIN NUTS(1/2"-20)(35)
onto
PEDAL SHAFTS.
Tighten
PEDAL SHAFTS
and
THIN NUTS(1/2"-20)(35)
until
THIN NUTS(1/2"-20)(35)
are tight against
CRANK(10).
Connect the
LINKAGES(9, 74)
to the
LINKAGE CONNECTORS(75)
with the
LOCKING PINS(76).
a.
b.
c.
d.
e.
f.
g.
The
RIGHT PEDAL(32)
has
R
marked on the bottom side of the pedal. The
LEFT PEDAL(31)
has
L
marked on the bottom side of the pedal. Both
PEDALS(31, 32)
have
RIGHTHAND THREADS.
Tighten both
PEDALS(31, 32)
by turning clockwise.
STEP 11
NOTE:
IMPORTANT
STUDY THE ABOVE ILLUSTRATION AND READ ALL OF STEP 11 "a" through "g"
BEFORE ATTACHING PEDALS AND CONNECTING LINKAGES.
STEP 12
Install two
"AA"
batteries into the
MONITOR(47),
two batteries included. Plug the
SPEED PICKUP WIRE(23)
into the
MONITOR(47).
Slide the
MONITOR(47)
onto the
BRACKET
on the
MAIN FRAME(1).
See page 11
for detailed battery installation instructions.
