Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
ASSEMBLY INSTRUCTIONS
7
R
STEP 1
Position the
FRONT STABILIZER(3)
with the
R
mark on the right side so the
WHEELS(76)
face the front.
Attach the
FRONT STABILIZER(3)
to the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x75mm)
(80), ARC WASHERS(M8)(97), LOCK WASHERS(M8)(98),
and
ACORN NUTS(M8x1.25)(94).
STEP 2
Attach the
REAR STABILIZER(2)
to the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x75mm)(80),
ARC WASHERS(M8)(97), LOCK WASHERS(M8)(98),
and
ACORN NUTS(M8x1.25)(94).
NOTE:
You can adjust the
LEVELING CAPS(73)
on the
REAR STABILIZER(2)
to keep the
Airgometer
1100
stable.
