ASSEMBLY INSTRUCTIONS
10
STEP 9
Install two AA batteries into the
METER(31).
Two batteries are included. See page 13 for detailed battery
installation instructions. Connect the
SENSOR WIRE(30)
and the
PULSE PLUG WIRE(38)
to the
EXTENSION WIRES
on the
METER(31).
Press the
METER(31)
into the hole in the
COVERS(33, 34).
STEP 8
NOTE:
The
RIGHT PEDAL(37)
has
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(37)
has
right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(36)
has
L
stamped on
the end of the pedal shaft. The
LEFT PEDAL(36)
has left hand threads and is tightened by turning
counterclockwise.
Thread the
RIGHT PEDAL(37)
into the right side of the
CRANK(7)
as shown. Tighten the pedal securely.
Do the same to attach the
LEFT PEDAL(36)
to the left side of the
CRANK(7).
Summary of Contents for 15-4525
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...21 NOTES...
