Stamina 15-4525, Owner'S Manual

OPERATIONAL INSTRUCTIONS

SEAT ADJUSTMENT

LOAD ADJUSTMENT

CAUTION:

1.
2.

Rotate the 

ADJUSTMENT KNOB(49)

 counterclockwise until the pin releases when the knob is pulled.

Pull the 

ADJUSTMENT KNOB(49)

 and slide the 

SEAT FRAME(5)

 up or down to desired position. Lock

the 

SEAT FRAME(5)

 in position by inserting the pin of the 

ADJUSTMENT KNOB(49)

 into one of the

adjustment holes in the 

REAR FRAME(3),

 then rotate the 

ADJUSTMENT KNOB(49)

 clockwise to lock

the 

SEAT FRAME(5)

 securely.

Sit on the seat and place your feet on the pedals. You should be able to move through a complete pedal
stroke without locking your knees or shifting your hips on the seat. The seat is too close to the pedals if
you have more than a slight bend in your knees at the bottom of the pedal stroke. The seat is too far from
the pedals if you have to completely straighten your knees at the bottom of the pedal stroke.

1.

2.

Proper seat adjustment is important. There are twelve adjustment holes in the 

REAR FRAME(3).

 These

adjustment holes allow users to adjust the position of the seat for efficient exercise.

Do not attempt to adjust the seat while you are on the 

Air Fusion 4525 Bike.

Always tighten the 

ADJUSTMENT KNOB(49)

 after adjusting the seat to a new position.

To increase the load, turn the 

TENSION KNOB(29)

 clockwise. To decrease the load, turn the 

TENSION

KNOB(29)

 counterclockwise.

12